跳至主要内容

Lonsdor K518 K518ISE FAQ :Hardware,adapter,car list,function,update etc.

Here is the Frequently asked questions(FAQ) of Lonsdor K518ISE key programmer,incl. hardware,adapter,car list,function,update etc.
Here we go:
Q: Does Lonsdor key programmer support Spanish ?
A:No,OBD2 key programmer Lonsdor K518 is the Chinese version.K518 supports English(K518ISE) and Thai(K518THA) language,cannot exchange with the machine.
Q:Does Lonsdor K518ISE key programmer need tokens ?
A:No,it does not need tokens.It’s not a token tool.
Q:How to register the K518 machine ?
A:For new user,click Registration,input user name(email),name(min 2 char),password(min 6 char).email verification code and click YES to complete registration（if interrupted after registration is done,you will go to the system update-Registered user to proceed）.Then go to Activation confirmation to continue.
After confirming activation,it will enter into setup password interface,please set 6-digit numbersas your startup password.Then after information verification by Lonsdor (5-30 minutes,you can check the progress by clicking”Refresh”),you will required to re-enter the password to verify,when you get the notification that verification successful,the whole process before using the device is complete.
Q:Is it upgradeable and how to update?
A:Enable network connection,the system will automatically update to the latest version.
Q:The internet connection will work for 1 year?And then users need to buy again the option ?
A:Update by internet connection for free lifetime.
Only the option that our engineer pay too much energy and cost to develop,that will charge again,so far all update are free.
Q:The SKE-LT smart key emulator is used once?
A:No,these SKE-LT smart key emulator can be used for many times.Once you generate key success,turn on the switch on the emulator unit for 3 times,date will be automatically erased.
(Note:If you failed to program key with the emulator,you properly do not clear the date restored)
Q:KPROG is not for all cars ?
A:used to program MCU and EEPROM on ECU circuit board.
Q:Will it read pin code on US sold Hyundai and kia smart system?
A:K518 can work on Hyundai and kia smart system with 47,8A chip.For 46 chip,you have to collect the copy password first then calculate the pin code.
Q:Will K518ISE program2017 Ford Escape smart key works on 49 chip.
A:2017 Ford Escape smart key works on 49 chip.
Q:Did you have to do CEM’s and KVM’s dismantling and reading first if want to program Volvo V40 smart key?
A:Yes,Need to remove CEM and KVM to read first.
Q:Will K518 work on 2007 dodge ram?
A:Lonsdor K518ISE supports Dodge RAM1500 and Journey models only at present.
Q:Can I program BMW CAS3+ smart key when all keys have lost ?
A:Sorry,Lonsdor K518 cannot program CAS3+ all key lost.
Q:Will K518 read ISN code from BMW CAS system?
A:No,it can not.you can choose to use CGDI Pro BMW or other tools .
Q:Will K518 program Nissan proximity key?
A:Nissan prox works great.
Q:Will Lonsdor K518ISE add a key on Mitsubishi ASX 2013 ?
A:Yes,It will .
Q:Will it program Cadillac ESCALADE year 2017 smart key ?
A:Yes,we have tested and worked great.
Q:Can I read pin code and program key for PSA cars ?
A:Yes,used on some PSA cars (2003 to 2008 years )to read pin and program keys all ok.
Q:I wonder will the Lonsdor K518 work on VAG 4th IMMO when all keys lost ?
A:Works on a part of Vag 2010-all keys lost,supports 4th Immo system 202AD key as long as the 4th Immo data can be read out successfully by 202AD.
Q:Hi,Will K518 program BMW FEW system when all keys have lost ?
A:Yes,It will .
Q:Will I need to remove FEM/BDC,If I need to work on this function ?
A:Don’t need to remove FEM/BDC.
Q:Will K518 program Toyota H type key all keys lost?
A:Sorry,it cannot program H chip all keys lost.
Q:Does Lonsdor work on 2017CAMRY smart key with DST128 chip when all keys have lost ?
A:Sorry,Lonsdor K518ISE can not program Toyota DST128 all keys lost,But it will program DST40,DST80 and 8Achip all keys lost by OBD if using SKE-LT Smart Key emulator .
For more details information, welcome to Add my Whatsapp (+86 13728952674) or Skype (008618124509953) if you have, Your Private Secretary in Car Repair Area! 16 Hours Online at your Service!
xingobd2
Email : admin@xingobd2.com
Skype : 008618124509953
Whatsapp : 0086 13728952674
Website : http://www.xingobd2.com
标签：

评论

发表评论

此博客中的热门博文

HOW TO INSTALL VCDS 18.2.1 FULL ACTIVE SOFTWARE VAGCOM 18.2 MANUAL GUIDE

VAG COM 18.2  Interface from xingobd2 is latest full active stable version vag diagnostic cable centre. Stable  VCDS 18.2  hex can cable can work with internet no problem.  New VAG COM 18.2.0  vw audi seat skoda interface with Automatic recovery function no afraid of internet. VAGCOM 18.2.0  Stable version VCDS 18.2 full active VAG COM 18.1 hex can cable Today xingobd2 engineer will guide you how to install Stable vag com 18.2.0 VCDS 18.2 full active Vag hex can cable software. Newer  VAG COM 18.2  interface For VW Audi Seat Skoda is easy to install and run with internet smoothly. How to install vagcom 18.2 vcds 18.2.1 hex can software in your computer? Please as guide to do, still not plug cable with computer!! Steps 1:    Run software as Administrator, Still Click next until finish, not run vcds software, just close it Steps 2:    Plug vcds interface obd2 with car, when led work, then plug usb with computer Steps 3: ...
2 条评论
阅读全文

BMW CAS4 CAN-filter V5 Connection Diagram

BMW CAS4 CAN-filter V5 Connection Diagram BMW CAS4 CAN-filter is a special module allows to adjust mileage readings in BMW F01, F07, F10 and X3 2011-2012 (with motorola processor 9S12 XEP mask 5M48H / 4M48H – SC 66 7095 CAG). This is tips of BMW  CAS4 CAN-filter V5  Connection Diagram. BMW filter V5 pinout   CAS connection diagram   F3x IKE   F3x with MOST   F15  instrument panel   F15  filter wire connection Brown— can out H Green— can out L Yellow— can in H Blue— can in L Red— 12V Black— Ground NOTE: CANBUS Inductance needs to be removed;       INS (instrument) chip needs to be dealt with first. F15 instrument panel filter   F18 instrument panel  wire connection   F35 IKE   F56   FEM connection diagram     Note: The newest BMW CAS4 CAN-filter V5: Supported by  xingobd2...
发表评论
阅读全文

How to rework Carprog Chinese Clone as original one?

Carprog Chinese clone  actually can do many things, almost as original, if it is reworked well such as read security codes or read flash Here a  Carprog clone , it cannot read security codes or read flash. It does the procedure but the output is all bad. Either no output or repeated characters. many members with Carprog clone can say it will work have to tweak it ,and read the manuals really only for mcu usage. I have retooled and remade many of my own adapters , also changed bridges , caps , oclis crystal etc on mainboard also flashed to 4.74 firm . all the N/a are gone and eprom and mcu reading is great no faults. also fixed ground plane and insulated board from aluminum case with k tape. its working fine now but has a nice coat of dust on it. To rework Carprog PCB, here is what you can try: Check A1. You may need to improve the work can. First and most important of all is to change 74HC125D to 74HCT125M on your carparog, i have good clone (good pc...
1 条评论
阅读全文